MC33164D-3R2

MC33164D-3R2 Overview

It is mounted through 8 terminals on the power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). Power management is possible to find a series of 1 functions. A series of 1 channels can be found on this supervisor. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. During the reflow process, a peak temperature of 240 is specified for the package. The supervisor is always powered by a 2.4V volt supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts IC management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 8 pins on power management. 8 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. There should be no more than 10V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountIt is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The supervisor's supply current is specified to 24μA. It is always advisable to use MC33164, the base supervisor number, when searching for similar PMICs from the manufacturer. This power management requires 3V power to work.

MC33164D-3R2 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
24μA operating supply current

MC33164D-3R2 Applications

There are a lot of ON Semiconductor MC33164D-3R2 Voltage Supervisors applications.

• Low voltage/high power - AI, GPU
• Data storage applications
• Power distribution systems of operating room
• DVR
• Cloud computing
• Radio
• Military electronics
• Stable power system
• Detection of phase imbalance
• Leakage current detection