MC34060APG

MC34060APG Overview

In the 14-DIP (0.300, 7.62mm) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. PMIC is packaged in a solid enclosure of Tube. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThe supply and operating voltage of the dc control are 7V~40V. Workable in an dc switcher where 0°C~70°C TA is the 0°C~70°C TArm. dc dc regulator is made easier with Surface Mount. The dcdc regulator features Dead Time Control for efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. DUAL are the position of the terminal of the switching converters. An array of 14 terminations of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis set to 15V. MC34060A can be searched for other relevant dc to dc converter ics. Switching converter has a total of 14 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. It is recommended to use 7V as the minimum input voltage of dc dc voltage regulator. Statistically, the DC regulator outputs 30V voltage. It should be noted that the dc to dc regulator only accepts 40V voltage as input voltage. normally, the dc dc regulator's output current is 200mA, which you should keep in mind when starting a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 96 % during power-up and power-down. The Through Hole makes DC switcher suitable for most applications and prototypes. Switching controllers operate at 25kHz frequencies. To operate the voltage regulator dc to dc safely and reliably, users should apply 15V. There is a possibility of damage to the component if the switching voltage regulators current exceeds 15mA.

MC34060APG Features

Transistor Driver Outputs
Dead Time Control
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
Frequency: 25kHz

MC34060APG Applications

There are a lot of ON Semiconductor MC34060APG DC to DC converter applications.

• Analog precision reference circuits
• Network technology
• Handheld GPS
• Energy management systems
• Motor controller circuits
• Balance equipment
• Textile machinery
• Wide-range voltage regulation circuits
• Various CNC machine tools
• Low output voltage switching power supply circuits