MC34164P-5G

MC34164P-5G Overview

There are 3 mounting terminals on the voltage supervisor, each of which has a different function. There is a Bulk-packaging method applied to IC management. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of TO-226-3, TO-92-3 (TO-226AA) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. A supply voltage of 2.4V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. Through Hole mounts IC management. The power management system can be categorized as a Power Management Circuits chip. In total, it has 3 pins on IC management. This power management has 3 pins. It is recommended that Vsup should not be less than 1V for this IC power. This IC power should be powered by no more than 10V volts of supply voltage (Vsup). Power management' mounting is recommended to be done with the Through Hole type of mounting. You should set the supervisor's temperature during 0°C~70°C TA . During operation, this power management system outputs Open Drain or Open Collector. There is a 32μA supply current present in the power management. To find similar IC managements from the manufacturer, you can always search by MC34164. To operate this power management, you will need at least 5V volts of power. In terms of current rating, the IC management can handle 100mA currents.

MC34164P-5G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
32μA operating supply current
Current rating of 100mA

MC34164P-5G Applications

There are a lot of ON Semiconductor MC34164P-5G Voltage Supervisors applications.

• Radar
• Power distribution systems of CCU
• DVR
• FPGA design
• Solar power charger
• Automotive permanent magnet synchronous motors
• Detection of phase imbalance
• Network equipment
• Leakage current detection
• Electrical fire monitoring system