MC74AC273NG

MC74AC273NG Overview

The item is packaged in 20-DIP (0.300, 7.62mm)cases. As part of the package Tube, it is embedded. T flip flop uses Non-Invertedas its output configuration. JK flip flop uses Positive Edgeas the trigger. There is an electrical part that is mounted in the way of Through Hole. The supply voltage is set to 2V~6V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This electronic flip flop is of type D-Type. It belongs to the 74ACseries of FPGAs. This D flip flop should not have a frequency greater than 175MHz. A total of 1elements are contained within it. It has been determined that there have been 20 terminations. It is a member of the 74AC273 family. The power source is powered by 5V. There is 4.5pF input capacitance for this T flip flop. The electronic device belongs to the ACfamily. A part of the electronic system is mounted in the way of Through Hole. With its 20pins, it is designed to work with most electronic flip flops. There is a clock edge trigger type of Positive Edgeon this device. The RS flip flops belongs to FF/Latches base part number. This flip flop is designed with 8 Bits. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. Normally, the supply voltage (Vsup) should be kept above 2V. Considering its reliability, this T flip flop is well suited for RAIL. In order to achieve high efficiency, the supply voltage should be maintained at 5V. This D latch consumes 8μA quiescent current at all. It is reported that there are 8 channels.

MC74AC273NG Features

Tube package
74AC series
20 pins
8 Bits

MC74AC273NG Applications

There are a lot of ON Semiconductor MC74AC273NG Flip Flops applications.

• Common Clocks
• CMOS Process
• EMI reduction circuitry
• Balanced 24 mA output drivers
• Data transfer
• Modulo – n – counter
• Functionally equivalent to the MC10/100EL29
• Asynchronous counter
• Balanced Propagation Delays
• Cold spare funcion