MC74AC374NG

MC74AC374NG Overview

20-DIP (0.300, 7.62mm)is the way it is packaged. D flip flop is included in the Tubepackage. This output is configured with Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. There is an electrical part that is mounted in the way of Through Hole. A supply voltage of 2V~6V is required for operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. In FPGA terms, D flip flop is a type of 74ACseries FPGA. A frequency of 155MHzshould be the maximum output frequency. The element count is 1 . It consumes 8μA of quiescent There are 20 terminations,This D latch belongs to the family of 74AC374. The D flip flop is powered by a voltage of 5V . This T flip flop has a capacitance of 4.5pF farads at the input. It is a member of the ACfamily of D flip flop. The electronic part is mounted in the way of Through Hole. A total of 20pins are provided on this board. It has a clock edge trigger type of Positive Edge. It is included in FF/Latches. There are 8bits in this flip flop. There is a 6Vmaximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be kept above 2V. In order to achieve its superior flexibility, 8 circuits are used. This D flip flop is equipped with 0 ports. High efficiency requires the supply voltage to be maintained at 5V. It is designed with 3 output lines.

MC74AC374NG Features

Tube package
74AC series
20 pins
8 Bits

MC74AC374NG Applications

There are a lot of ON Semiconductor MC74AC374NG Flip Flops applications.

• Pattern generators
• Common Clocks
• Shift Registers
• Asynchronous counter
• Convert a momentary switch to a toggle switch
• Digital electronics systems
• Event Detectors
• Memory
• Safety Clamp
• Power down protection