MC74AC377DT

MC74AC377DT Overview

20-TSSOP (0.173, 4.40mm Width)is the packaging method. D flip flop is embedded in the Tube package. As configured, the output uses Non-Inverted. The trigger configured with it uses Positive Edge. Surface Mountis in the way of this electric part. A supply voltage of 2V~6V is required for operation. A temperature of -40°C~85°C TAis used in the operation. This D latch has the type D-Type. JK flip flop belongs to the 74ACseries of FPGAs. A frequency of 140MHzshould not be exceeded by its output. A total of 1elements are present in it. It consumes 8μA of quiescent current without being affected by external factors. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Power is provided by a 5V supply. A JK flip flop with a 4.5pFfarad input capacitance is used here. In this case, the D flip flop belongs to the ACfamily. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. Normal operation requires a supply voltage (Vsup) above 2V.

MC74AC377DT Features

Tube package
74AC series

MC74AC377DT Applications

There are a lot of Rochester Electronics, LLC MC74AC377DT Flip Flops applications.

• High Performance Logic for test systems
• Common Clocks
• Count Modes
• Storage registers
• Dynamic threshold performance
• Functionally equivalent to the MC10/100EL29
• Consumer
• Event Detectors
• ESD performance
• Control circuits