MC74AC377DT

MC74AC377DT Overview

As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). A package named Tubeincludes it. As configured, the output uses Non-Inverted. The trigger configured with it uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 2V~6Vis required for its operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. This D latch has the type D-Type. The 74ACseries comprises this type of FPGA. Its output frequency should not exceed 140MHz Hz. A total of 1 elements are present. As a result, it consumes 8μA quiescent current. It has been determined that there have been 20 terminations. It is a member of the 74AC377 family. It is powered from a supply voltage of 5V. There is 4.5pF input capacitance for this T flip flop. The electronic device belongs to the ACfamily. This electronic part is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. This RS flip flops is a part number FF/Latches. There are 8bits in this flip flop. The maximal supply voltage (Vsup) reaches 6V. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. Despite its superior flexibility, it relies on 8 circuits to achieve it. In view of its reliability, this D flip flop is a good fit for RAIL. An electrical current of 3.3/5V volts is applied to it.

MC74AC377DT Features

Tube package
74AC series
20 pins
8 Bits
3.3/5V power supplies

MC74AC377DT Applications

There are a lot of ON Semiconductor MC74AC377DT Flip Flops applications.

• Reduced system switching noise
• Count Modes
• Asynchronous counter
• Bus hold
• Automotive
• Storage registers
• Buffer registers
• Memory
• Frequency Divider circuits
• Counters