MC74AC574DWG

MC74AC574DWG Overview

In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. The package Tubecontains it. The output it is configured with uses Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates at a voltage of 2V~6V. A temperature of -40°C~85°C TAis used in the operation. This logic flip flop is classified as type D-Type. In FPGA terms, D flip flop is a type of 74ACseries FPGA. It should not exceed 95MHzin its output frequency. The element count is 1 . It consumes 8μA of quiescent There have been 20 terminations. This D latch belongs to the family of 74AC574. It is powered by a voltage of 5V . A 4.5pFfarad input capacitance is provided by this T flip flop. An electronic device belonging to the family ACcan be found here. There is an electronic part mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device has the clock edge trigger type of Positive Edge. This part is included in FF/Latches. It is designed with 8bits. 6Vis the maximum supply voltage (Vsup). Normal operation requires a supply voltage (Vsup) above 2V. Due to its superior flexibility, it uses 8 circuits. The D flip flop has no ports embedded. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. There are 3 output lines in this JK flip flop.

MC74AC574DWG Features

Tube package
74AC series
20 pins
8 Bits

MC74AC574DWG Applications

There are a lot of ON Semiconductor MC74AC574DWG Flip Flops applications.

• Asynchronous counter
• Bounce elimination switch
• Reduced system switching noise
• Consumer
• Patented noise
• QML qualified product
• Supports Live Insertion
• Memory
• ESD performance
• Memory