MC74AC574DWR2

MC74AC574DWR2 Overview

The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). It is included in the package Tape & Reel (TR). The output it is configured with uses Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. A 2V~6Vsupply voltage is required for it to operate. A temperature of -40°C~85°C TAis considered to be the operating temperature. D-Typedescribes this flip flop. The 74ACseries comprises this type of FPGA. This D flip flop should not have a frequency greater than 95MHz. In total, it contains 1 elements. This process consumes 8μA quiescents. There have been 20 terminations. The 74AC574 family contains this object. An input voltage of 5Vpowers the D latch. There is 4.5pF input capacitance for this T flip flop. The electronic device belongs to the ACfamily. There is an electronic component mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. It has a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. 8bits are used in its design. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. For normal operation, the supply voltage (Vsup) should be kept above 2V. Due to its superior flexibility, it uses 8 circuits. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The D flip flop has no ports embedded. In order to operate, the chip has 3 output lines.

MC74AC574DWR2 Features

Tape & Reel (TR) package
74AC series
20 pins
8 Bits

MC74AC574DWR2 Applications

There are a lot of ON Semiconductor MC74AC574DWR2 Flip Flops applications.

• Frequency division
• 2 – Bit synchronous counter
• Computers
• High Performance Logic for test systems
• Set-reset capability
• Dynamic threshold performance
• Individual Asynchronous Resets
• Common Clocks
• Clock pulse
• Latch