MC74AC574MELG

MC74AC574MELG Overview

20-SOIC (0.209, 5.30mm Width)is the way it is packaged. Package Tape & Reel (TR)embeds it. This output is configured with Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. Surface Mountis occupied by this electronic component. The JK flip flop operates with an input voltage of 2V~6V volts. In this case, the operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. FPGAs belonging to the 74ACseries contain this type of chip. A frequency of 95MHzshould be the maximum output frequency. There are 1 elements in it. As a result, it consumes 8μA quiescent current and is not affected by external forces. There are 20 terminations,D latch belongs to the 74AC574 family. A voltage of 5V provides power to the D latch. Its input capacitance is 4.5pF farads. In terms of electronic devices, this device belongs to the ACfamily of devices. The electronic part is mounted in the way of Surface Mount. This board has 20 pins. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. An electronic part designed with 8bits is used in this application. As soon as 6Vis reached, Vsup reaches its maximum value. The supply voltage (Vsup) should be maintained above 2V for normal operation. To achieve this superior flexibility, 8 circuits are used. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. There are 2 ports embedded in the flip flops. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. There are no output lines on the JK flip flop.

MC74AC574MELG Features

Tape & Reel (TR) package
74AC series
20 pins
8 Bits

MC74AC574MELG Applications

There are a lot of ON Semiconductor MC74AC574MELG Flip Flops applications.

• Storage Registers
• Computing
• Control circuits
• Bus hold
• Circuit Design
• Frequency Divider circuits
• ATE
• Data transfer
• Test & Measurement
• EMI reduction circuitry