MC74ACT374N

MC74ACT374N Overview

In the form of 20-DIP (0.300, 7.62mm), it has been packaged. The Tubepackage contains it. Tri-State, Non-Invertedis the output configured for it. In the configuration of the trigger, Positive Edgeis used. Through Holemounts this electrical part. A supply voltage of 4.5V~5.5V is required for operation. In this case, the operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74ACT series. Its output frequency should not exceed 160MHz Hz. The list contains 1 elements. As a result, it consumes 8μA quiescent current and is not affected by external forces. The number of terminations is 20. This D latch belongs to the family of 74ACT374. An input voltage of 5Vpowers the D latch. Its input capacitance is 4.5pFfarads. ACTis the family of this D flip flop. This electronic part is mounted in the way of Through Hole. It is designed with 20 pins. This device has the clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. It is designed with 8bits. It reaches the maximum supply voltage (Vsup) at 5.5V. A normal operating voltage (Vsup) should remain above 4.5V. In order to achieve its superior flexibility, 8 circuits are used. The D latch operates on 5V volts. A total of 2ports are embedded in the D flip flop. The JK flip flop is with 3 output lines to operate.

MC74ACT374N Features

Tube package
74ACT series
20 pins
8 Bits
5V power supplies

MC74ACT374N Applications

There are a lot of ON Semiconductor MC74ACT374N Flip Flops applications.

• Power down protection
• Shift Registers
• Set-reset capability
• 2 – Bit synchronous counter
• Communications
• EMI reduction circuitry
• Load Control
• Computing
• Synchronous counter
• Guaranteed simultaneous switching noise level