MC74ACT377N

MC74ACT377N Overview

As a result, it is packaged as 20-DIP (0.300, 7.62mm). The Tubepackage contains it. In the configuration, Non-Invertedis used as the output. Positive Edgeis the trigger it is configured with. Through Holemounts this electrical part. A voltage of 4.5V~5.5Vis used as the supply voltage. A temperature of -40°C~85°C TAis used in the operation. D-Typeis the type of this D latch. FPGAs belonging to the 74ACTseries contain this type of chip. This D flip flop should not have a frequency greater than 140MHz. A total of 1elements are present in it. There is 8μA quiescent consumption. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. JK flip flop belongs to 74ACT377 family. An input voltage of 5Vpowers the D latch. This T flip flop has a capacitance of 4.5pF farads at the input. Devices in the ACTfamily are electronic devices. The electronic part is mounted in the way of Through Hole. Basically, it is designed with a set of 20 pins. This device exhibits a clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. It is designed with 8bits. Vsup reaches its maximum value at 5.5V. Keeping the supply voltage (Vsup) above 4.5V is necessary for normal operation. Its superior flexibility is attributed to its use of 8 circuits. The D latch operates on 5V volts.

MC74ACT377N Features

Tube package
74ACT series
20 pins
8 Bits
5V power supplies

MC74ACT377N Applications

There are a lot of ON Semiconductor MC74ACT377N Flip Flops applications.

• ESCC
• Bounce elimination switch
• Matched Rise and Fall
• Memory
• 2 – Bit synchronous counter
• Shift Registers
• Asynchronous counter
• Shift registers
• Counters
• Balanced 24 mA output drivers