MC74ACT564N

MC74ACT564N Overview

20-DIP (0.300, 7.62mm)is the way it is packaged. It is contained within the Tubepackage. As configured, the output uses Tri-State, Inverted. It is configured with the trigger Positive Edge. It is mounted in the way of Through Hole. With a supply voltage of 4.5V~5.5V volts, it operates. Temperature is set to -40°C~85°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74ACT series. It should not exceed 85MHzin its output frequency. A total of 1elements are contained within it. This process consumes 8μA quiescents. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. A voltage of 5V is used to power it. The input capacitance of this JK flip flopis 4.5pF farads. In terms of electronic devices, this device belongs to the ACTfamily of devices. Vsup reaches its maximum value at 5.5V. The supply voltage (Vsup) should be maintained above 4.5V for normal operation. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There is also a characteristic of BROADSIDE VERSION OF 534.

MC74ACT564N Features

Tube package
74ACT series

MC74ACT564N Applications

There are a lot of Rochester Electronics, LLC MC74ACT564N Flip Flops applications.

• Reduced system switching noise
• Modulo – n – counter
• Event Detectors
• Balanced 24 mA output drivers
• ESD protection
• Divide a clock signal by 2 or 4
• Buffered Clock
• Cold spare funcion
• Registers
• Storage Registers