All Products

MC74ACT573DTR2

Buffer, D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT573 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: ON Semiconductor
  • Origchip NO: 598-MC74ACT573DTR2
  • Package: 20-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 949
  • Description: Buffer, D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT573 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)(Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Factory Lead Time 11 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2005
Series 74ACT
JESD-609 Code e4
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Packing Method TAPE AND REEL
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Reach Compliance Code unknown
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number 74ACT573
Pin Count 20
Qualification Status Not Qualified
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 1:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Number of Bits 8
Propagation Delay 10.5 ns
Turn On Delay Time 10.5 ns
Family ACT
Logic Function Buffer, D-Type, Latch
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Number of Input Lines 8
Independent Circuits 1
Number of Output Lines 3
Length 6.5mm
Width 4.4mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

MC74ACT573DTR2 Overview


In the 20-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. Tape & Reel (TR) is the packaging method. Tri-State is the output configured for it. A D-Type Transparent Latch logic type is used in this electrical device. Mounting this electronic component follows the Surface Mount method. There is no supply voltage for this device. It is -40°C~85°C at the operating temperature. It is a type of FPGA belonging to the 74ACT series. It is designed with 8 bits. A device such as this has 20 terminations designed. As a member of the 74ACT573 family, it falls under that category. A 5V voltage supply is required for operation. With 20 pins, it is equipped. This electronic device belongs to the family of ACT. The 20 pins are designed into it. Electronic parts are mounted using the Surface Mount method. This device has 2 ports on board, which are all available at the same time. It belongs to the subcategory of FF/Latches. A total of 5V power supplies are needed to run it. An electronic circuit can be found on 8 input lines. This device is well suited for TAPE AND REEL based on its reliable performance. A high level of efficiency is achieved by maintaining the supply voltage at 5V. 3 output lines provide binary equivalents of input lines.

MC74ACT573DTR2 Features


20-TSSOP (0.173, 4.40mm Width) package
74ACT series
8 Bits
74ACT573 family
20 pin count
20 pins
5V power supplies

MC74ACT573DTR2 Applications


There are a lot of ON Semiconductor MC74ACT573DTR2 Latches applications.

  • General-Purpose Register
  • Pattern Generators
  • Shift left with parallel loading
  • Buffer Storage
  • Watches
  • Up-Down Johnson
  • Automotive Infotainment
  • Up/down difference counting
  • Lamp and Display (LED)
  • Buffer register