MC74ACT574MELG

MC74ACT574MELG Overview

The flip flop is packaged in a case of 20-SOIC (0.209, 5.30mm Width). The package Tape & Reel (TR)contains it. This output is configured with Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. A temperature of -40°C~85°C TAis used in the operation. There is D-Type type of electronic flip flop associated with this device. JK flip flop belongs to the 74ACTseries of FPGAs. In order for it to function properly, its output frequency should not exceed 100MHz. In total, it contains 1 elements. As a result, it consumes 8μA quiescent current and is not affected by external forces. Currently, there are 20 terminations. It is a member of the 74ACT574 family. Power is supplied from a voltage of 5V volts. JK flip flop input capacitance is 4.5pF farads. In terms of electronic devices, this device belongs to the ACTfamily of devices. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. In this device, the clock edge trigger type is Positive Edge. It is included in FF/Latches. An electronic part designed with 8bits is used in this application. Its flexibility is enhanced by 8 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. It operates from 5V power supplies. The flip flop has 2ports embedded within it. In order to ensure high efficiency, the supply voltage should remain at 5V. To operate, the chip has a total of 3 output lines.

MC74ACT574MELG Features

Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
5V power supplies

MC74ACT574MELG Applications

There are a lot of ON Semiconductor MC74ACT574MELG Flip Flops applications.

• Single Up Count-Control Line
• Clock pulse
• Storage Registers
• Modulo – n – counter
• Memory
• Frequency division
• ESCC
• Asynchronous counter
• Patented noise
• Consumer