MC74HC174AN

MC74HC174AN Overview

16-DIP (0.300, 7.62mm)is the packaging method. D flip flop is embedded in the Tube package. Non-Invertedis the output configured for it. The trigger it is configured with uses Positive Edge. There is an electronic component mounted in the way of Through Hole. A voltage of 2V~6Vis used as the supply voltage. It is at -55°C~125°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type D-Type. In terms of FPGAs, it belongs to the 74HC series. A frequency of 35MHzshould not be exceeded by its output. In total, it contains 1 elements. As a result, it consumes 4μA quiescent current. The number of terminations is 16. The object belongs to the 74HC174 family. The power source is powered by 4.5V. This T flip flop has a capacitance of 10pF farads at the input. HC/UHis the family of this D flip flop. In this case, the electronic component is mounted in the way of Through Hole. A total of 16pins are provided on this board. In this device, the clock edge trigger type is Positive Edge. This part is included in FF/Latches. It is designed with 6bits. In this case, the maximum supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be maintained above 2V for normal operation. Its flexibility is enhanced by 7 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for RAIL. It is designed with 6 output lines.

MC74HC174AN Features

Tube package
74HC series
16 pins
6 Bits

MC74HC174AN Applications

There are a lot of ON Semiconductor MC74HC174AN Flip Flops applications.

• Automotive
• Bounce elimination switch
• Balanced 24 mA output drivers
• Single Down Count-Control Line
• Storage Registers
• Data transfer
• Digital electronics systems
• Single Up Count-Control Line
• Asynchronous counter
• Matched Rise and Fall