MC74HC174ANG

MC74HC174ANG Overview

It is packaged in the way of 16-DIP (0.300, 7.62mm). The package Tubecontains it. As configured, the output uses Non-Inverted. This trigger uses the value Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. A supply voltage of 2V~6V is required for operation. Temperature is set to -55°C~125°C TA. This electronic flip flop is of type D-Type. It is a type of FPGA belonging to the 74HC series. In order for it to function properly, its output frequency should not exceed 35MHz. There are 1 elements in it. There is a consumption of 4μAof quiescent energy. A total of 16terminations have been recorded. The 74HC174 family contains this object. Power is supplied from a voltage of 5V volts. Its input capacitance is 10pF farads. An electronic device belonging to the family HC/UHcan be found here. The electronic part is mounted in the way of Through Hole. Basically, it is designed with a set of 16 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This part is included in FF/Latches. An electronic part with 6bits has been designed. Vsup reaches its maximum value at 6V. The supply voltage (Vsup) should be kept above 2V for normal operation. Its flexibility is enhanced by 7 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for RAIL. The output current of 5.2mA makes it feature maximum design flexibility. Inputs are set to 6.

MC74HC174ANG Features

Tube package
74HC series
16 pins
6 Bits

MC74HC174ANG Applications

There are a lot of ON Semiconductor MC74HC174ANG Flip Flops applications.

• Modulo – n – counter
• Bus hold
• Single Up Count-Control Line
• Buffer registers
• Memory
• Asynchronous counter
• Digital electronics systems
• Differential Individual
• QML qualified product
• Functionally equivalent to the MC10/100EL29