MC74HC175AFELG

MC74HC175AFELG Overview

The package is in the form of 16-SOIC (0.209, 5.30mm Width). The Tape & Reel (TR)package contains it. T flip flop uses Differentialas its output configuration. This trigger uses the value Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. Temperature is set to -55°C~125°C TA. It belongs to the type D-Typeof flip flops. JK flip flop is a part of the 74HCseries of FPGAs. In order for it to function properly, its output frequency should not exceed 35MHz. In total, there are 1 elements. As a result, it consumes 4μA quiescent current. There have been 16 terminations. You can search similar parts based on 74HC175. The D flip flop is powered by a voltage of 3V . JK flip flop input capacitance is 10pF farads. In this case, the D flip flop belongs to the HC/UHfamily. The electronic part is mounted in the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. This device's clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. An electronic part designed with 4bits is used in this application. In this case, the maximum supply voltage (Vsup) reaches 6V. Normally, the supply voltage (Vsup) should be kept above 2V. Its superior flexibility is attributed to its use of 4 circuits. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. A power supply of 2/6Vis required to operate it.

MC74HC175AFELG Features

Tape & Reel (TR) package
74HC series
16 pins
4 Bits
2/6V power supplies

MC74HC175AFELG Applications

There are a lot of ON Semiconductor MC74HC175AFELG Flip Flops applications.

• Load Control
• Divide a clock signal by 2 or 4
• ESD protection
• Buffered Clock
• Event Detectors
• High Performance Logic for test systems
• Count Modes
• QML qualified product
• Data storage
• Storage registers