MC74HC273ADW

MC74HC273ADW Overview

As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tube. In the configuration, Non-Invertedis used as the output. The trigger it is configured with uses Positive Edge. There is an electric part mounted in the way of Surface Mount. A supply voltage of 2V~6V is required for operation. It is at -55°C~125°C TAdegrees Celsius that the system is operating. There is D-Type type of electronic flip flop associated with this device. It belongs to the 74HCseries of FPGAs. There should be no greater frequency than 35MHzon its output. D latch consists of 1 elements. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A voltage of 3V provides power to the D latch. Electronic devices of this type belong to the HC/UHfamily. The maximal supply voltage (Vsup) reaches 6V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V.

MC74HC273ADW Features

Tube package
74HC series

MC74HC273ADW Applications

There are a lot of Rochester Electronics, LLC MC74HC273ADW Flip Flops applications.

• Computers
• Memory
• Individual Asynchronous Resets
• Buffered Clock
• Divide a clock signal by 2 or 4
• Registers
• Memory
• Storage Registers
• High Performance Logic for test systems
• Computing