MC74HC273ADWG

MC74HC273ADWG Overview

The package is in the form of 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tube. As configured, the output uses Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates with an input voltage of 2V~6V volts. The operating temperature is -55°C~125°C TA. D-Typeis the type of this D latch. In terms of FPGAs, it belongs to the 74HC series. In order for it to function properly, its output frequency should not exceed 35MHz. In total, it contains 1 elements. A total of 20terminations have been recorded. The 74HC273 family contains this object. The power source is powered by 3V. The input capacitance of this JK flip flopis 10pF farads. It belongs to the family of electronic devices known as HC/UH. It is mounted in the way of Surface Mount. 20pins are included in its design. It has a clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. There are 8bits in its design. Vsup reaches 6V, the maximal supply voltage. Normally, the supply voltage (Vsup) should be kept above 2V. In light of its reliable performance, this T flip flop is well suited for RAIL. It operates from 2/6V power supplies. With a current output of 7.8mA , it offers maximum design flexibility. There are no output lines on the JK flip flop. As a result, it consumes 4μA of quiescent current without being affected by external factors. A total of 8 channels are available.

MC74HC273ADWG Features

Tube package
74HC series
20 pins
8 Bits
2/6V power supplies

MC74HC273ADWG Applications

There are a lot of ON Semiconductor MC74HC273ADWG Flip Flops applications.

• Counters
• Parallel data storage
• Single Up Count-Control Line
• Differential Individual
• Patented noise
• Bounce elimination switch
• Memory
• Individual Asynchronous Resets
• Supports Live Insertion
• Synchronous counter