MC74HC273AF

MC74HC273AF Overview

The item is packaged in 20-SOIC (0.209, 5.30mm Width)cases. D flip flop is included in the Tubepackage. T flip flop uses Non-Invertedas its output configuration. It is configured with the trigger Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. Powered by a 2V~6Vvolt supply, it operates as follows. Temperature is set to -55°C~125°C TA. D-Typedescribes this flip flop. It belongs to the 74HCseries of FPGAs. A frequency of 35MHzshould be the maximum output frequency. D latch consists of 1 elements. T flip flop consumes 4μA quiescent energy. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74HC273 family contains it. It is powered by a voltage of 3V . A 10pFfarad input capacitance is provided by this T flip flop. Devices in the HC/UHfamily are electronic devices. There is an electronic component mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. It has a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. An electronic part designed with 8bits is used in this application. It reaches the maximum supply voltage (Vsup) at 6V. For normal operation, the supply voltage (Vsup) should be above 2V. Its superior flexibility is attributed to its use of 8 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for RAIL. It runs on 2/6Vvolts of power.

MC74HC273AF Features

Tube package
74HC series
20 pins
8 Bits
2/6V power supplies

MC74HC273AF Applications

There are a lot of ON Semiconductor MC74HC273AF Flip Flops applications.

• Memory
• Balanced 24 mA output drivers
• Computers
• Shift registers
• Asynchronous counter
• Count Modes
• ESD protection
• Latch-up performance
• Clock pulse
• Consumer