MC74HC273AFG

MC74HC273AFG Overview

The item is packaged in 20-SOIC (0.209, 5.30mm Width)cases. Package Tubeembeds it. Currently, the output is configured to use Non-Inverted. It is configured with the trigger Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2V~6V volts. It is operating at a temperature of -55°C~125°C TA. D-Typedescribes this flip flop. It is a type of FPGA belonging to the 74HC series. Its output frequency should not exceed 35MHz. D latch consists of 1 elements. There is 4μA quiescent consumption. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74HC273family includes it. A voltage of 3V provides power to the D latch. Input capacitance of this device is 10pF farads. This D flip flop belongs to the family of HC/UH. A part of the electronic system is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. This part is included in FF/Latches. It is designed with 8bits. As soon as 6Vis reached, Vsup reaches its maximum value. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. In order to achieve its superior flexibility, 8 circuits are used. Considering its reliability, this T flip flop is well suited for RAIL. A total of 2/6V power supplies are needed to run it.

MC74HC273AFG Features

Tube package
74HC series
20 pins
8 Bits
2/6V power supplies

MC74HC273AFG Applications

There are a lot of ON Semiconductor MC74HC273AFG Flip Flops applications.

• Memory
• EMI reduction circuitry
• Asynchronous counter
• Count Modes
• Data transfer
• Single Up Count-Control Line
• Data storage
• Memory
• Common Clocks
• Buffered Clock