MC74HC374ADTG

MC74HC374ADTG Overview

The flip flop is packaged in a case of 20-TSSOP (0.173, 4.40mm Width). You can find it in the Tubepackage. T flip flop uses Tri-State, Non-Invertedas the output. Positive Edgeis the trigger it is configured with. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 2V~6V volts, it operates. Temperature is set to -55°C~125°C TA. It is an electronic flip flop with the type D-Type. In this case, it is a type of FPGA belonging to the 74HC series. A frequency of 35MHzshould be the maximum output frequency. The element count is 1 . It consumes 4μA of quiescent current without being affected by external factors. There have been 20 terminations. Members of the 74HC374family make up this object. The D flip flop is powered by a voltage of 3V . Its input capacitance is 10pFfarads. Electronic devices of this type belong to the HC/UHfamily. In this case, the electronic component is mounted in the way of Surface Mount. 20pins are included in its design. It has a clock edge trigger type of Positive Edge. This part is included in FF/Latches. 6Vis the maximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be above 2V. As a result of its reliable performance, this T flip flop is suitable for RAIL. An electrical current of 2/6V volts is applied to it. The flip flop has 2embedded ports. This T flip flop features a maximum design flexibility due to its output current of 7.8mA. A total of 3input lines have been provided. It is of 4 channels.

MC74HC374ADTG Features

Tube package
74HC series
20 pins
2/6V power supplies

MC74HC374ADTG Applications

There are a lot of ON Semiconductor MC74HC374ADTG Flip Flops applications.

• Data transfer
• Consumer
• Digital electronics systems
• Common Clocks
• Shift registers
• Load Control
• Patented noise
• ESD protection
• ATE
• Memory