MC74HC377ADWR2G

MC74HC377ADWR2G Overview

In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. As part of the package Tape & Reel (TR), it is embedded. In the configuration, Non-Invertedis used as the output. There is a trigger configured with Positive Edge. It is mounted in the way of Surface Mount. Powered by a 2V~6Vvolt supply, it operates as follows. It is operating at a temperature of -55°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 74HC series. There should be no greater frequency than 35MHzon its output. There are 1 elements in it. There is a consumption of 4μAof quiescent energy. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This D latch belongs to the family of 74HC377. A voltage of 5V is used as the power supply for this D latch. The input capacitance of this JK flip flopis 10pF farads. It belongs to the family of electronic devices known as HC/UH. There is an electronic part mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. Its clock edge trigger type is Positive Edge. This part is included in FF/Latches. It is designed with a number of bits of 8. As soon as Vsup reaches 6V, the maximum supply voltage is reached. For normal operation, the supply voltage (Vsup) should be above 2V. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. An electrical current of 2/6V volts is applied to it. This input has 8lines.

MC74HC377ADWR2G Features

Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies

MC74HC377ADWR2G Applications

There are a lot of ON Semiconductor MC74HC377ADWR2G Flip Flops applications.

• Single Down Count-Control Line
• Divide a clock signal by 2 or 4
• Safety Clamp
• EMI reduction circuitry
• Latch-up performance
• Clock pulse
• Computers
• Pattern generators
• Cold spare funcion
• Supports Live Insertion