MC74HC4020ADG

MC74HC4020ADG Overview

A 16-SOIC (0.154, 3.90mm Width)package is used for this device. It is configured with 16terminations. With a supply voltage of 3V volts, it is possible to run it in a fully flexible manner. The number of all component pins is 16. There is a package in the form of Tube. There are 16 pins going on to connect other parts in the circuit. It is mounted in the direction of [0]. The HC/UHfamily is derived from it. Having been designed as a member of the 74HCseries, it is well suited for use in a wide range of applications. It is adopted that the logic type is [0]. -55°C~125°Cis the recommended operating temperature. The mounting type is Surface Mount. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. There are 14bits stored in each element of the array. Using the Pbfree code, the result may be yes. Under its base part number of [0], you will find additional related parts. RAIL is employed for its packing. In this case, 2/6Vvoltage is generated by the voltage source. The minimum supply voltage (Vsup) is 2V. 50MHzis the frequency of operation. Typically, the supply voltage (Vsup) is limited to 6V. There are 1 input lines that allow binary data to be input in the form of an on/off signal. As far as output lines are concerned, it has [0].

MC74HC4020ADG Features

Embedded in the 16-SOIC (0.154, 3.90mm Width) package
14 bits per element
Frequency of 50MHz

MC74HC4020ADG Applications

There are a lot of ON Semiconductor MC74HC4020ADG Counters & Dividers applications.

• Frequency dividers
• Digital multiplexing and demultiplexing
• Timing applications
• Time Out Timer for Consumer-Application Industrial Controls
• Fixed and programmable counters greater than 10
• Time-delay circuits
• DIVISION
• Fixed or Programmable Frequency Division
• Time delay circuits
• Frequency dividing circuits