MC74HCT374AN

MC74HCT374AN Overview

In the form of 20-DIP (0.300, 7.62mm), it has been packaged. D flip flop is embedded in the Tube package. In the configuration, Tri-State, Non-Invertedis used as the output. The trigger it is configured with uses Positive Edge. It is mounted in the way of Through Hole. A supply voltage of 4.5V~5.5V is required for operation. Currently, the operating temperature is -55°C~125°C TA. This electronic flip flop is of type D-Type. JK flip flop belongs to the 74HCTseries of FPGAs. This D flip flop should not have a frequency greater than 30MHz. A total of 1 elements are present. As a result, it consumes 4μA quiescent current and is not affected by external forces. There are 20 terminations,The 74HCT374family includes it. An input voltage of 5Vpowers the D latch. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. An electronic device belonging to the family HCTcan be found here. This electronic part is mounted in the way of Through Hole. The 20pins are designed into the board. The clock edge trigger type for this device is Positive Edge. This device has the base part number FF/Latches. This flip flop is designed with 8 Bits. Its superior flexibility is attributed to its use of 8 circuits. There are 5V power supplies attached to it. The flip flop has 2ports embedded within it. If high efficiency is desired, the supply voltage should be kept at 5V. It is designed with 3 output lines.

MC74HCT374AN Features

Tube package
74HCT series
20 pins
8 Bits
5V power supplies

MC74HCT374AN Applications

There are a lot of ON Semiconductor MC74HCT374AN Flip Flops applications.

• CMOS Process
• Latch-up performance
• Power down protection
• Clock pulse
• Frequency Dividers
• Storage registers
• Supports Live Insertion
• Memory
• Single Down Count-Control Line
• Counters