MC74HCT574ANG

MC74HCT574ANG Overview

20-DIP (0.300, 7.62mm)is the packaging method. It is contained within the Tubepackage. This output is configured with Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. There is an electric part mounted in the way of Through Hole. With a supply voltage of 4.5V~5.5V volts, it operates. It is operating at a temperature of -55°C~125°C TA. The type of this D latch is D-Type. In FPGA terms, D flip flop is a type of 74HCTseries FPGA. You should not exceed 30MHzin the output frequency of the device. D latch consists of 1 elements. T flip flop consumes 4μA quiescent energy. Currently, there are 20 terminations. If you search by 74HCT574, you will find similar parts. Power is provided by a 5V supply. A JK flip flop with a 10pFfarad input capacitance is used here. Devices in the HCTfamily are electronic devices. Through Hole mounts this electronic component. 20pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. An electronic part designed with 8bits is used in this application. Its superior flexibility is attributed to its use of 8 circuits. A total of 5V power supplies are needed to run it. The flip flop has 2embedded ports. In order to achieve high efficiency, the supply voltage should be maintained at 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 6mA. It has 3 output lines to operate.

MC74HCT574ANG Features

Tube package
74HCT series
20 pins
8 Bits
5V power supplies

MC74HCT574ANG Applications

There are a lot of ON Semiconductor MC74HCT574ANG Flip Flops applications.

• ESCC
• Asynchronous counter
• Reduced system switching noise
• Patented noise
• Parallel data storage
• Guaranteed simultaneous switching noise level
• Load Control
• Dynamic threshold performance
• Consumer
• Instrumentation