MC74HCT74ANG

MC74HCT74ANG Overview

The item is packaged in 14-DIP (0.300, 7.62mm)cases. It is contained within the Tubepackage. T flip flop uses Differentialas its output configuration. It is configured with the trigger Positive Edge. There is an electronic component mounted in the way of Through Hole. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. In this case, the operating temperature is -55°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. This type of FPGA is a part of the 74HCT series. Its output frequency should not exceed 30MHz. The list contains 2 elements. During its operation, it consumes 2μA quiescent energy. A total of 14terminations have been recorded. A voltage of 5V provides power to the D latch. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Devices in the HCTfamily are electronic devices. The maximal supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be kept above 4.5V.

MC74HCT74ANG Features

Tube package
74HCT series

MC74HCT74ANG Applications

There are a lot of Rochester Electronics, LLC MC74HCT74ANG Flip Flops applications.

• Bounce elimination switch
• Circuit Design
• Buffered Clock
• Digital electronics systems
• Patented noise
• High Performance Logic for test systems
• QML qualified product
• Automotive
• Single Up Count-Control Line
• Storage registers