MC74LCX374DWR2

MC74LCX374DWR2 Overview

It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). A package named Tape & Reel (TR)includes it. T flip flop is configured with an output of Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. A voltage of 2V~3.6Vis required for its operation. A temperature of -40°C~85°C TAis used in the operation. D-Typedescribes this flip flop. It belongs to the 74LCXseries of FPGAs. You should not exceed 150MHzin the output frequency of the device. There are 1 elements in it. T flip flop consumes 10μA quiescent energy. 20terminations have occurred. The 74LCX16374 family contains this object. Power is provided by a 3.3V supply. Its input capacitance is 7pF farads. In terms of electronic devices, this device belongs to the LVC/LCX/Zfamily of devices. There is an electronic part mounted in the way of Surface Mount. 20pins are included in its design. There is a clock edge trigger type of Positive Edgeon this device. The RS flip flops belongs to FF/Latches base part number. It is designed with 8bits. The supply voltage (Vsup) should be maintained above 2V for normal operation. 8 circuits are used to achieve its superior flexibility. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. The D flip flop is embedded with 2ports. If high efficiency is to be achieved, the supply voltage should be maintained at 3.3V. There are 3 output lines in this JK flip flop.

MC74LCX374DWR2 Features

Tape & Reel (TR) package
74LCX series
20 pins
8 Bits

MC74LCX374DWR2 Applications

There are a lot of ON Semiconductor MC74LCX374DWR2 Flip Flops applications.

• Balanced 24 mA output drivers
• Set-reset capability
• Asynchronous counter
• Shift Registers
• Latch-up performance
• ESD protection
• CMOS Process
• Test & Measurement
• Bounce elimination switch
• ESCC