MC74LCX74DTR2

MC74LCX74DTR2 Overview

The flip flop is packaged in 14-TSSOP (0.173, 4.40mm Width). A package named Tape & Reel (TR)includes it. As configured, the output uses Differential. In the configuration of the trigger, Positive Edgeis used. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 2V~3.6V volts, it operates. It is operating at a temperature of -40°C~85°C TA. This D latch has the type D-Type. JK flip flop is a part of the 74LCXseries of FPGAs. Its output frequency should not exceed 150MHz. As a result, it consumes 10μA quiescent current and is not affected by external forces. A total of 14terminations have been recorded. This D latch belongs to the family of 74LCX74. The power source is powered by 2.5V. JK flip flop input capacitance is 7pF farads. A device of this type belongs to the family of LVC/LCX/Z. It is mounted in the way of Surface Mount. 14pins are included in its design. There is a clock edge trigger type of Positive Edgeon this device. It is included in FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 3.6V. The supply voltage (Vsup) should be maintained above 2V for normal operation. In order to achieve its superior flexibility, 2 circuits are used. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. It runs on 3.3Vvolts of power. It has 1 output lines to operate.

MC74LCX74DTR2 Features

Tape & Reel (TR) package
74LCX series
14 pins
3.3V power supplies

MC74LCX74DTR2 Applications

There are a lot of ON Semiconductor MC74LCX74DTR2 Flip Flops applications.

• Circuit Design
• High Performance Logic for test systems
• Synchronous counter
• Control circuits
• Balanced 24 mA output drivers
• Memory
• ESCC
• Latch
• Bus hold
• Differential Individual