MC74LVX374DTR2G

MC74LVX374DTR2G Overview

The package is in the form of 20-TSSOP (0.173, 4.40mm Width). As part of the package Tape & Reel (TR), it is embedded. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 2V~3.6Vis required for its operation. In the operating environment, the temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. JK flip flop belongs to the 74LVXseries of FPGAs. Its output frequency should not exceed 95MHz Hz. The list contains 1 elements. During its operation, it consumes 4μA quiescent energy. Terminations are 20. The 74LVX374 family contains this object. It is powered from a supply voltage of 2.7V. This T flip flop has a capacitance of 4pF farads at the input. Electronic devices of this type belong to the LV/LV-A/LVX/Hfamily. Electronic part Surface Mountis mounted in the way. This board is designed with 20pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The part you are looking for is included in FF/Latches. An electronic part with 8bits has been designed. For normal operation, the supply voltage (Vsup) should be kept above 2V. 8 circuits are used to achieve its superior flexibility. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. The flip flop contains 2ports. It is designed with 3 output lines.

MC74LVX374DTR2G Features

Tape & Reel (TR) package
74LVX series
20 pins
8 Bits

MC74LVX374DTR2G Applications

There are a lot of ON Semiconductor MC74LVX374DTR2G Flip Flops applications.

• Safety Clamp
• Latch-up performance
• Asynchronous counter
• EMI reduction circuitry
• Matched Rise and Fall
• Control circuits
• Dynamic threshold performance
• Load Control
• Clock pulse
• Automotive