MC74LVX574DTR2

MC74LVX574DTR2 Overview

It is packaged in the way of 20-TSSOP (0.173, 4.40mm Width). The package Tape & Reel (TR)contains it. T flip flop uses Tri-State, Non-Invertedas the output. JK flip flop uses Positive Edgeas the trigger. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 2V~3.6V volts, it operates. Temperature is set to -40°C~85°C TA. It belongs to the type D-Typeof flip flops. In terms of FPGAs, it belongs to the 74LVX series. This D flip flop should not have a frequency greater than 75MHz. A total of 1elements are contained within it. During its operation, it consumes 4μA quiescent energy. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74LVX574family includes it. A voltage of 2.7V is used as the power supply for this D latch. This JK flip flop has a 4pFfarad input capacitance. An electronic device belonging to the family LV/LV-A/LVX/Hcan be found here. A part of the electronic system is mounted in the way of Surface Mount. A total of 20pins are provided on this board. The clock edge trigger type for this device is Positive Edge. This device is part of the FF/Latchesbase part number family. 8bits are used in its design. Normally, the supply voltage (Vsup) should be kept above 2V. 8 circuits are used to achieve its superior flexibility. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. There are 2 ports embedded in the flip flops. There are 3 output lines in this JK flip flop.

MC74LVX574DTR2 Features

Tape & Reel (TR) package
74LVX series
20 pins
8 Bits

MC74LVX574DTR2 Applications

There are a lot of ON Semiconductor MC74LVX574DTR2 Flip Flops applications.

• Supports Live Insertion
• Frequency Divider circuits
• Balanced Propagation Delays
• Common Clocks
• Guaranteed simultaneous switching noise level
• Individual Asynchronous Resets
• Storage registers
• Pattern generators
• Buffer registers
• Frequency Dividers