MC74LVX574DWR2G

MC74LVX574DWR2G Overview

The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). It is contained within the Tape & Reel (TR)package. This output is configured with Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at 2V~3.6Vvolts. Currently, the operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74LVX series. A frequency of 75MHzshould not be exceeded by its output. There are 1 elements in it. It consumes 4μA of quiescent current without being affected by external factors. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. JK flip flop belongs to 74LVX574 family. The D flip flop is powered by a voltage of 2.7V . A 4pFfarad input capacitance is provided by this T flip flop. LV/LV-A/LVX/His the family of this D flip flop. This electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. There is a clock edge trigger type of Positive Edgeon this device. This part is included in FF/Latches. This flip flop is designed with 8 Bits. A normal operating voltage (Vsup) should remain above 2V. The superior flexibility of this product is achieved by using 8 circuits. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The D flip flop is embedded with 2ports. It operates with 3 output lines.

MC74LVX574DWR2G Features

Tape & Reel (TR) package
74LVX series
20 pins
8 Bits

MC74LVX574DWR2G Applications

There are a lot of ON Semiconductor MC74LVX574DWR2G Flip Flops applications.

• Shift registers
• Buffer registers
• Count Modes
• Data transfer
• Balanced 24 mA output drivers
• Power down protection
• Single Up Count-Control Line
• Frequency Divider circuits
• Storage Registers
• CMOS Process