MC74LVX574M

MC74LVX574M Overview

In the form of 20-SOIC (0.209, 5.30mm Width), it has been packaged. As part of the package Tube, it is embedded. It is configured with Tri-State, Non-Invertedas an output. In the configuration of the trigger, Positive Edgeis used. There is an electrical part that is mounted in the way of Surface Mount. A supply voltage of 2V~3.6V is required for operation. Temperature is set to -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. JK flip flop is a part of the 74LVXseries of FPGAs. Its output frequency should not exceed 75MHz Hz. In total, there are 1 elements. As a result, it consumes 4μA of quiescent current without being affected by external factors. Terminations are 20. It is a member of the 74LVX574 family. Power is provided by a 2.7V supply. This T flip flop has a capacitance of 4pF farads at the input. Devices in the LV/LV-A/LVX/Hfamily are electronic devices. It is mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device's clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. It is designed with a number of bits of 8. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. In order to achieve its superior flexibility, 8 circuits are used. As a result of its reliability, this D flip flop is ideally suited for RAIL. A total of 2ports are embedded in the D flip flop. It operates with 3 output lines.

MC74LVX574M Features

Tube package
74LVX series
20 pins
8 Bits

MC74LVX574M Applications

There are a lot of ON Semiconductor MC74LVX574M Flip Flops applications.

• Safety Clamp
• Bus hold
• ESCC
• Counters
• Individual Asynchronous Resets
• Single Up Count-Control Line
• Latch
• Data Synchronizers
• Data storage
• Shift Registers