MC74VHC574DTG

MC74VHC574DTG Overview

It is packaged in the way of 20-TSSOP (0.173, 4.40mm Width). The package Tubecontains it. It is configured with Tri-State, Non-Invertedas an output. The trigger configured with it uses Positive Edge. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~5.5V. In the operating environment, the temperature is -40°C~85°C TA. D-Typeis the type of this D latch. The 74VHCseries comprises this type of FPGA. It should not exceed 115MHzin its output frequency. There are 1 elements in it. There is a consumption of 4μAof quiescent energy. A total of 20terminations have been recorded. D latch belongs to the 74VHC574 family. Power is supplied from a voltage of 3.3V volts. There is 4pF input capacitance for this T flip flop. In this case, the D flip flop belongs to the AHC/VHCfamily. This electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. In this device, the clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. This flip flop is designed with 8 Bits. Vsup reaches 5.5V, the maximal supply voltage. The supply voltage (Vsup) should be maintained above 2V for normal operation. In view of its reliability, this D flip flop is a good fit for RAIL. The power supply is 2/5.5V. There are 2 ports embedded in the flip flops. In order to operate, the chip has 3 output lines. It is of 8 channels.

MC74VHC574DTG Features

Tube package
74VHC series
20 pins
8 Bits
2/5.5V power supplies

MC74VHC574DTG Applications

There are a lot of ON Semiconductor MC74VHC574DTG Flip Flops applications.

• Frequency division
• Individual Asynchronous Resets
• Common Clocks
• Pattern generators
• Balanced Propagation Delays
• Memory
• Balanced 24 mA output drivers
• Consumer
• Buffered Clock
• Automotive