MC74VHCT374ADTR2

MC74VHCT374ADTR2 Overview

The flip flop is packaged in a case of 20-TSSOP (0.173, 4.40mm Width). You can find it in the Tape & Reel (TR)package. This output is configured with Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. Surface Mountmounts this electrical part. A 4.5V~5.5Vsupply voltage is required for it to operate. -40°C~85°C TAis the operating temperature. This logic flip flop is classified as type D-Type. In FPGA terms, D flip flop is a type of 74VHCTseries FPGA. A frequency of 130MHzshould not be exceeded by its output. In total, it contains 1 elements. Despite external influences, it consumes 4μAof quiescent current. A total of 20 terminations have been made. The 74VHCT374 family contains this object. A voltage of 5V is used to power it. Its input capacitance is 4pFfarads. An electronic device belonging to the family AHCT/VHCTcan be found here. A part of the electronic system is mounted in the way of Surface Mount. 20pins are included in its design. A Positive Edgeclock edge trigger is used in this device. The part is included in FF/Latches. An electronic part designed with 8bits is used in this application. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Normally, the supply voltage (Vsup) should be kept above 4.5V. Its flexibility is enhanced by 8 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. The system runs on a power supply of 5V watts. A D flip flop with 2embedded ports is available. The JK flip flop is with 3 output lines to operate.

MC74VHCT374ADTR2 Features

Tape & Reel (TR) package
74VHCT series
20 pins
8 Bits
5V power supplies

MC74VHCT374ADTR2 Applications

There are a lot of ON Semiconductor MC74VHCT374ADTR2 Flip Flops applications.

• Data transfer
• Memory
• CMOS Process
• Frequency Dividers
• Data storage
• Latch
• Shift registers
• Individual Asynchronous Resets
• Bus hold
• Guaranteed simultaneous switching noise level