MCP100-300DI/TO

MCP100-300DI/TO Overview

This power management consists of 3 mounting terminals on which it can be mounted. In terms of packaging, power management follows the Bulk model. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. For your reference, this PMIC includes a list of TO-226-3, TO-92-3 (TO-226AA) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. During operation, the power ic is supplied with a voltage of 2.85V. In a 1 supply voltage, the PMIC chip conducts. Power management is included in the Through Hole mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Power management has a total of 3 pins. Power managment ic pin count is 3. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The mounting type of the supervisors is Through HoleYou should set the supervisor's temperature during -40°C~85°C TA . While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. Supplied with a operating current of 60μA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using MCP100, the base power ics number. A maximum supply temperature of 60μA can be used.

MCP100-300DI/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

MCP100-300DI/TO Applications

There are a lot of Microchip Technology MCP100-300DI/TO Voltage Supervisors applications.

• Data storage applications
• Medical-specific isolation transformer
• External alarm
• Precision measurement
• Urban rail transit weak current power monitoring
• Fire equipment power monitoring system
• Battery-powered equipment
• Electronics installed in the vehicle
• Network equipment
• Refrigeration