MCP100-315HI/TO

MCP100-315HI/TO Overview

There are 3 mounting terminals on the voltage supervisor, each of which has a different function. There is a Bulk-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. For your reference, this PMIC includes a list of TO-226-3, TO-92-3 (TO-226AA) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. IC management conducts in a 3V-voltage supply. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Through Hole. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 3 pins. 3 pins are present on the power management system. IC management can only work with a supply voltage of 1V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type is Through Hole. Temperature setting for the supervisors should be -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. For this power management, there is an 60μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MCP100, the base power ics number. The power management can work with a maximum supply temperature of 60μA.

MCP100-315HI/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

MCP100-315HI/TO Applications

There are a lot of Microchip Technology MCP100-315HI/TO Voltage Supervisors applications.

• Multi-voltage system
• Detection of phase sequence
• Embedded computing
• External alarm
• Power distribution systems of CCU
• Smart meter
• Leakage protection
• Military communications
• Microcontroller system
• FPGA design