MCP101-270HI/TO

MCP101-270HI/TO Overview

There are 3 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in the form of a Bulk, power management is easy to use. Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes TO-226-3, TO-92-3 (TO-226AA) functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. In a 2.55V supply voltage, the power management conducts. During operation, the power ic is supplied with a voltage of 1. The mount is attached to Through Hole. It is possible to subcategorize this power ic as a Power Management Circuits chip. 3 pins are present in total in this power management. This power management system has 3 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management' mounting is recommended to be done with the Through Hole type of mounting. The supervisors should be set to the following temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. For this power management, there is an 60μA volt supply current. It is always advisable to use MCP101, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature that PMIC chip can work with is 60μA.

MCP101-270HI/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

MCP101-270HI/TO Applications

There are a lot of Microchip Technology MCP101-270HI/TO Voltage Supervisors applications.

• Medical-specific insulation monitor
• Battery cars
• Utility meter
• DVR
• WiFi router
• Important electronics for automotive protection
• Embedded computing
• DSP
• Computer applications
• Satellite navigation