MCP101-300DI/TO

MCP101-300DI/TO Overview

There are 3 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in a Bulk-shape, IC management comes with a number of features. Power management is possible to find a series of 1 functions. This power management is made up of 1 channels which are available in a series format. As a reference, this IC power includes TO-226-3, TO-92-3 (TO-226AA) functions for your convenience. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. During operation, the power ic is supplied with a voltage of 2.85V. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is attached to Through Hole. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, IC powers are 3 pins on the board. 3 pins are present on the power management system. IC management can only work with a supply voltage of 1V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Through Hole mounting is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For this power management, there is an 60μA volt supply current. It is always advisable to use MCP101, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature is 60μA.

MCP101-300DI/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

MCP101-300DI/TO Applications

There are a lot of Microchip Technology MCP101-300DI/TO Voltage Supervisors applications.

• Transformer load monitoring equipment
• External alarm
• Functional modules
• Kitchen appliances
• Multi-voltage system
• DSP
• Consumer electronics
• Solar power charger
• Embedded computing
• Sensitive sensors