MCP102T-270E/TT

MCP102T-270E/TT Overview

There are 3 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. IC management is specified that the package peak reflow temperature should be 260. Power management conducts at a voltage of 1. The mount is attached to Surface Mount. The power management system can be categorized as a Power Management Circuits chip. In total, it has 3 pins on IC management. 3 pins make up the power management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a 1.75μA supply current present in the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MCP102, which is the base power ics number. At the most, voltage supervisor can work with a supply temperature of 1.75μA.

MCP102T-270E/TT Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current

MCP102T-270E/TT Applications

There are a lot of Microchip Technology MCP102T-270E/TT Voltage Supervisors applications.

• Microprocessor system
• Leakage current detection
• Battery-powered equipment
• Important electronics for automotive protection
• Network equipment
• Linux and server computing
• Battery cars
• Transformer load monitoring equipment
• Radio
• Power distribution systems of CCU