MCP102T-300E/LB

MCP102T-300E/LB Overview

There are 3 terminals connected to this power management, which makes it easy to mount. Packaging is in the form of a Tape & Reel (TR). To assist you, this IC power includes 1 functions. There are 1 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes SC-70, SOT-323 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 3 pins on IC management. Power managment ic pin count is 3. IC management can only work with a supply voltage of 1V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The supervisor's supply current is specified to 1.75μA. A similar IC managements number of the manufacturer can always be found by using MCP102, the base power ics number. Voltage supervisor can work with a supply temperature of 1.75μA at the most.

MCP102T-300E/LB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current

MCP102T-300E/LB Applications

There are a lot of Microchip Technology MCP102T-300E/LB Voltage Supervisors applications.

• Power communication system
• Computer applications
• Power distribution systems of infant care room
• Leakage current detection
• Consumer electronics
• Detection of phase imbalance
• Refrigeration
• Satellite navigation
• Low voltage/high power - AI, GPU
• Display equipment