MCP111-195I/TO

MCP111-195I/TO Overview

A total of 3 terminals are used to mount this power management. Packaging is in the form of a Bulk. The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find TO-226-3, TO-92-3 (TO-226AA) functions for you to refer to. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Power ics operate at 1 supply voltages. Through Hole mounts IC management. A IC power such as this can be classified as a Power Management Circuits power management system. There are a total of 3 pins on power management. This power management system has 3 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Through Hole mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. During operation, this power management system outputs Open Drain or Open Collector. There is a 1.75μA supply current present in the power management. To find similar IC managements from the manufacturer, you can always search by MCP111. The maximum supply temperature is 1.75μA.

MCP111-195I/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current

MCP111-195I/TO Applications

There are a lot of Microchip Technology MCP111-195I/TO Voltage Supervisors applications.

• Functional modules
• Efficient information transmission
• Medical-specific isolation transformer
• Consumer electronics
• Leakage current detection
• DC stabilized power supply module
• Battery cars
• Battery-powered equipment
• Precision measurement
• External alarm