MCP111-240E/TO

MCP111-240E/TO Overview

A total of 3 terminals are used to mount this power management. Bulk-packaging is used. Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. Please find attached TO-226-3, TO-92-3 (TO-226AA) functions for your reference in this IC power. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. A supply voltage of 1 is used to conduct the PMIC chip. Power management is included in the Through Hole mount. There is a subcategory called Power Management Circuits for this power management. Power management has a total of 3 pins. 3 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Through Hole is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. It is estimated that the voltage supervisor's supply current is 1.75μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MCP111, which is the base power ics number. At most, voltage supervisor can operate at a supply temperature of 1.75μA.

MCP111-240E/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current

MCP111-240E/TO Applications

There are a lot of Microchip Technology MCP111-240E/TO Voltage Supervisors applications.

• Military communications
• Multi-voltage system
• Utility meter
• Solar power charger
• Network equipment
• Kitchen appliances
• Low voltage/high power - AI, GPU
• Set top box
• Radio
• DC stabilized power supply module