MCP112T-290E/LB

MCP112T-290E/LB Overview

This power management consists of 3 mounting terminals on which it can be mounted. It is packaged with Tape & Reel (TR). To assist you, this IC power includes 1 functions. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for SC-70, SOT-323 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Power management has a total of 3 pins. There are 3 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount mounting is recommended. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The supply current of the power management is 1.75μA. A similar IC managements number of the manufacturer can always be found by using MCP112, the base power ics number. The power management can work with a maximum supply temperature of 1.75μA.

MCP112T-290E/LB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current

MCP112T-290E/LB Applications

There are a lot of Microchip Technology MCP112T-290E/LB Voltage Supervisors applications.

• Fire equipment power monitoring system
• DVR
• Sensitive sensors
• Precision measurement
• Transformer load monitoring equipment
• Solar power charger
• DSP
• Radar
• Dash board
• Battery cars