MCP112T-300E/MB

MCP112T-300E/MB Overview

This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. There is a Tape & Reel (TR)-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes TO-243AA functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 3 pins that are attached to IC management. Pin count of the power management is 3. IC management can only work with a supply voltage of 1V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Mounting type Surface Mount is recommended. Temperature setting for the supervisors should be -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. Supplied with a operating current of 1.75μA, this PMIC is capable of fully function as specified. It is always advisable to use MCP112, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 1.75μA can be used.

MCP112T-300E/MB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current

MCP112T-300E/MB Applications

There are a lot of Microchip Technology MCP112T-300E/MB Voltage Supervisors applications.

• Personal computers
• Electric heating appliances
• Battery cars
• Transformer load monitoring equipment
• Kitchen appliances
• Household appliances
• Detection of phase imbalance
• Electronics installed in the vehicle
• Power communication system
• Leakage protection