MCP112T-315E/TT

MCP112T-315E/TT Overview

There are 3 terminals on this power management that allow it to be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. For your reference, this IC power includes a list of 1 functions. This power management is made up of 1 channels which are available in a series format. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. During operation, the power ic is supplied with a voltage of 1. Power management is included in the Surface Mount mount. The power management system can be categorized as a Power Management Circuits chip. A total of 3 pins are located on this power management. There are 3 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~125°C TA degrees. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The supervisor's supply current is specified to 1.75μA. A similar IC managements number of the manufacturer can always be found by using MCP112, the base power ics number. At most, voltage supervisor can operate at a supply temperature of 1.75μA.

MCP112T-315E/TT Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current

MCP112T-315E/TT Applications

There are a lot of Microchip Technology MCP112T-315E/TT Voltage Supervisors applications.

• Power distribution systems of ICU
• Dash board
• Electronics installed in the vehicle
• Battery cars
• DSP
• Sensitive sensors
• Detection of phase sequence
• Medical-specific insulation monitor
• Kitchen appliances
• WiFi router