MCP120-270HI/TO

MCP120-270HI/TO Overview

There are 3 terminals connected to this power management, which makes it easy to mount. It is packaged with Bulk. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find TO-226-3, TO-92-3 (TO-226AA) functions for you to refer to. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. When a supply voltage of 5V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. The power management is mounted by Through Hole. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 3 pins on power management. This power management has 3 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Mounting type Through Hole is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. There is a supply current of 60μA for the power management. You can always use MCP120, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature voltage supervisor can handle is 60μA.

MCP120-270HI/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

MCP120-270HI/TO Applications

There are a lot of Microchip Technology MCP120-270HI/TO Voltage Supervisors applications.

• Consumer electronics
• Digitally controlled LDO regulators circuit
• Power distribution systems of infant care room
• Stable power system
• Dash board
• Power communication system
• Detection of phase imbalance
• Magnetic resonance imaging
• DC stabilized power supply module
• Sensitive sensors