MCP120-485DI/TO

MCP120-485DI/TO Overview

There are 3 terminals on this power management that allow it to be mounted. Bulk-packaging is used. In this PMIC, you can find 1 functions for your reference. There are 1 channels available on this supervisor, and each channel has a different function. Please refer to power management for TO-226-3, TO-92-3 (TO-226AA) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 5V. When 1 is applied to the power ic, it conducts. The mount is attached to Through Hole. There is a subcategory of this power ic known as Power Management Circuits. In total, the power management has 3 pins in it. Power managment ic pin count is 3. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). A Through Hole mounting type is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. The power management's supply current is 60μA. A similar IC managements number of the manufacturer can always be found by using MCP120, the base power ics number. The maximum supply temperature is 60μA.

MCP120-485DI/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

MCP120-485DI/TO Applications

There are a lot of Microchip Technology MCP120-485DI/TO Voltage Supervisors applications.

• Power distribution systems of CCU
• Leakage current detection
• Sensitive sensors
• Radio
• Important electronics for automotive protection
• Precision measurement
• Display equipment
• Dash board
• DC stabilized power supply module
• External alarm