MCP121-475E/TO

MCP121-475E/TO Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. It is packaged with Bulk. To assist you, this IC power includes 1 functions. There are 1 channels on this power managment ic that can be found in a series. There are TO-226-3, TO-92-3 (TO-226AA) functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. When a supply voltage of 1 is applied to the power ic, it conducts. By Through Hole, IC management has been mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 3 pins that are attached to IC management. This power management has 3 pins. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. In this case, Through Hole is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. For this power management, there is an 20μA volt supply current. To find similar IC managements from the manufacturer, you can always search by MCP121. The maximum supply temperature voltage supervisor can handle is 20μA.

MCP121-475E/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
20μA operating supply current

MCP121-475E/TO Applications

There are a lot of Microchip Technology MCP121-475E/TO Voltage Supervisors applications.

• Power distribution systems of CCU
• Battery cars
• Fire equipment power monitoring system
• Important electronics for automotive safety
• Automotive permanent magnet synchronous motors
• Electric heating appliances
• Refrigeration
• Smart meter
• Leakage current detection
• Linux and server computing